Flex adhesives (powder)
CERESIT CM 16 PRO
Mortar With AERO Technology For Balconies
Flexible adhesive mortar with AERO technology, suitable for high-traffic areas, balconies and underfloor heating.
-
AERO technology: perfectly aerated, malleable texture
-
MICRO GEL technology: application at high temperatures
-
Recommended for all types of tiles
- Description
- How to Use
- FAQ
CERESIT® CM 16 PRO is a fibre-reinforced tile-adhesive ideal for gluing tiles on balconies, terraces, facades, on underfloor heating. For places exposed to heavy traffic and heavy loads, such as: communication routes, schools, supermarkets, shops, corridors, etc. Available pack sizes: 20kg and 25kg
-
AERO technology: perfectly aerated, malleable texture
-
MICRO GEL technology: application at high temperatures
-
Recommended for all types of tiles
-
For balconies and terraces
-
Customizable consistency
-
Reinforced with Fibre Force fibres - more grip and flexibility
CERESIT CM 16 PRO mortar can be used on load-bearing and dry substrates, free from substances that reduce adhesion (such as: fats, bitumen, dusts).
Pour the contents of the package into a precisely measured amount of clean, cool water and mix with a drill with a mixer until a homogeneous mass is obtained. Wait 5 minutes and mix again. If necessary, add a small amount of water and mix again.
Spread the mortar over the substrate with a notched trowel. The size of the trowel teeth depends on the size of the tiles. Properly selected consistency and size of trowel teeth ensure that a pressed, typical ceramic tile does not flow from the vertical plane, and the mortar covers min. 65% of the PCB mounting surface.
CERESIT CM 16 PRO can be used on cement and cement-lime plasters, cement screeds, cement primers, concrete, aerated concrete.
CERESIT 16 PRO can used indoor and outdoor, balconies and terraces, on horizontal and vertical surfaces, on deformable substrates.
Work should be carried out in dry conditions at temperature air and ground from +5°C to +30°C.