Flex adhesives (powder)
CERESIT CM 17 WHITE
Elastic Adhesive Tile for Delicate Natural Stone
White elastic adhesive with reinforcing microfibers Fibre Flex for natural stone, marble and mosaics
-
Elastic, resistant to deformation
-
High adhesion
-
Suitable for lining fireplaces and saunas
- Description
- How to Use
- FAQ
CERESIT® CM 17 WHITE is designed for fixing tiles made of all types of natural stone - marble, light limestone, travertine, granite, translucent stones, etc., tiles made of terracotta, clinker and porcelain stoneware, including large slabs, incl. over 1×1 m, as well as glass (except mirror) mosaics, on walls and floors inside and outside buildings, including complex and deformable bases and structural elements. Available pack size: 25 kg
-
Elastic, resistant to deformation
-
High adhesion
-
Suitable for lining fireplaces and saunas
-
Water and frost resistant
-
Resistant to tile slipping
-
Ideal for laying large tiles
CERESIT CM 17 WHITE mortar can be used on load-bearing and dry substrates, free from substances that reduce adhesion (such as: fats, bitumen, dusts).
Pour the contents of the package into a precisely measured amount of clean, cool water and mix with a drill with a mixer until a homogeneous mass is obtained. Wait 5 minutes and mix again. If necessary, add a small amount of water and mix again.
Spread the mortar over the substrate with a notched trowel. The size of the trowel teeth depends on the size of the tiles. Properly selected consistency and size of trowel teeth ensure that a pressed, typical ceramic tile does not flow from the vertical plane, and the mortar covers min. 65% of the PCB mounting surface.
Can be used on drywall and chipboard, durable non-peeling paint coatings, lightweight and cellular concrete, gypsum and anhydrite bases.
Suitable for lining fireplaces, stoves, saunas and hammams, the surfaces of which do not heat up above + 80 °C.
Work should be carried out in dry conditions at temperature air and ground from +5°C to +30°C.