Skip to Content
Recent searches
      Ceresit-CR55-15l-Front-UK-ecommerce_Global_layout.TIF

      Paints (finishes)

      CERESIT CR 55
      Hybrid Silicate Paint for Surface Protection

      Sol-silicate renovation paint formulated with hybrid silicate binder
      • Universal on mineral and polymeric based substrates
      • Very high vapor permeability
      • Hydrophobic

      TDS (1)

      SDSS (1)

      Find a retailer
      We have you covered
      Find a retailer

      Product Description

      CERESIT® CR 55 is formulated with hybrid silicate binder that ensures unique physical and chemical properties, excellent parameters and long-term durability, without changing the technical and aesthetic parameters of the finish during the use cycle. CR 55 is dedicated to be used outdoor and indoor, especially recommended for protecting of coated areas against weathering, biological corrosion and where high durability and dirt-resistance. Available pack size: 15 l and 3,5 l
      • Universal on mineral and polymeric based substrates
      • Very high vapor permeability
      • Hydrophobic
      • Long term durability and facade protection
      • For fresh mineral plasters
      • Highly resistant to fungi, algae, etc.
      Ceresit-CR55-15l-Front-UK-ecommerce_Global_layout.TIF
      Ceresit-CR55-15l-Front-UK-ecommerce_Global_layout.TIF

      How to Use

      CERESIT CR 55 SUBSTRATE PREPARATION

      CERESIT CR 55 may be applied on carrying, smooth, dry and clean substrates. Firstly uneven and damaged substrates should be repaired. It is recommended to check the strength of the existing mineral layers. The existing dirt, layers of low strength, lime and adhesive paint coatings, residuals of wall paper or glues should be completely removed. After being washed with water, the substrate should dry.

      APPLICATION OF CERESIT CR 55

      Before the paint application, the content of the container should be carefully stirred by means of the drill with a mixer for about 2 minutes. Usually it is sufficient to paint twice. Between the application of the subsequent layers at least 12-to 24-hour technological breaks should be maintained. CR 55 should be applied by means of a brush, roller or a spray device. It is important to apply the paint evenly. Application with spray machine using pressure machines is feasible. If there is such a need, it is possible to add not more than 5% of water and stir carefully

      IMPORTANT TO NOTE WHEN USING CERESIT CR 55

      Application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. The paint may cause discoloration impossible to be removed, therefore all the elements in contact with CR 55 should be protected. Skin and eyes should be protected. Protective gloves and glasses should be worn while applying the paint.

      Frequently asked questions

      CERESIT CR 55 is dedicated to be used outdoor and indoor, especially recommended for protecting of coated areas against weathering (e.g. sour rain), biological corrosion and in cases where high durability and dirt-resistance.

      CERESIT CR 55 can be applied on the mineral substrates (concrete, cement plasters, lime–cement and lime plasters, gypsum, etc.) as well as on many polymeric based substrates.

      CERESIT CR 55 is present in CERESIT Renovation System

      Works Well With
      • ${/content/heliux/adhesive/ceresit/gb/en/products/mortars-and-auxiliaries/renovation-plasters/renovation-plasters/product#/ceresit-cr-82/SAP_0201VNC019A2/searchResult.productFields.MainImageAltText}

        Renovation plasters
        CERESIT CR 82

        Solvent-free silane-based injection cream against rising wall moisture. 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/mortars-and-auxiliaries/renovation-plasters/renovation-plasters/product#/ceresit-cr-64/SAP_0201VNC014C2/searchResult.productFields.MainImageAltText}

        Renovation plasters
        CERESIT CR 64

        Finishing layer of the renovation façade system 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/mortars-and-auxiliaries/renovation-plasters/renovation-plasters/product#/ceresit-cr-60/SAP_0201VNC01Q62/searchResult.productFields.MainImageAltText}

        Renovation plasters
        CERESIT CR 60

        Coating for renovation of historical buildings 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/mortars-and-auxiliaries/renovation-plasters/renovation-plasters/product#/ceresit-cr-61/SAP_0201VNC014C0/searchResult.productFields.MainImageAltText}

        Renovation plasters
        CERESIT CR 61

        For historical and other buildings subject to renovation 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/mortars-and-auxiliaries/renovation-plasters/renovation-plasters/product#/ceresit-cr-62/SAP_0201VNC014C1/searchResult.productFields.MainImageAltText}

        Renovation plasters
        CERESIT CR 62

        Renovation plaster, specialized for historical buildings 

      Related How-To Guides
      View all
      • How to apply different types of plasters?
        How to apply different types of plasters?

        Ensure plaster application and texturing are done corectly. 
      • How to apply architectural concrete plaster
        How to apply architectural concrete plaster?

        Make your facade stand out with Visage.  
      • Fix EPS insulation boards with adhesive mortar?
        How to fix EPS insulation boards with adhesive mortar?

        Tips & Tricks for installing  EPS insulation with mortar.  
      • How to fix EPS insulation boards with PU adhesive?
        How to fix EPS insulation boards with PU adhesive?

        Guidelines to fixing EPS boards with PU adhesive. 
      • How to repair mechanical damages in plastered insulation?
        How to repair mechanical damages in plastered insulation?

        Find out how to fix gaps and gracks in a plastered facade. 
      • How to prepare the substrate for installation of the insulation layer
        How to prepare the substrate for installation of the insulation layer

        Inspection and preparation of concrete and brick walls before installation of ETICS 
      • Decorative plaster with visage stone effect
        Decorative plaster with visage stone effect

        Application of Ceresit CT 710 plaster - Visage Stone Effect - Granite. 
      • How to cope with bio contamination on facade
        How to cope with bio contamination on facade

        Bio contamination on facade: cleaning, anti-fungus concentrate, painting 
      United Kingdom

      © 2025 Henkel Ltd.