Skip to Content

CERESIT CT 15

Silicate Priming Paint

  • High opacity
  • Higher adhesion to the substrate
  • Waterproof

Features and benefits

Silicate dispersion composition of potassium and acrylic to prime the substrates for thin layer silicate plasters, putties and paint coats.

Properties

Description

CERESIT® CT 15 facilitates the application of thin layer silicate plasters and renderings inside and outside the buildings. It is recommended for priming the armoured layers within ETICS and traditional plasters. CT 15 can be applied to the surfaces of chipboards, gypsum cardboards and plasters, concrete and strong paint coats. CT 15 increases the adhesion of the plasters, putties and paints, it has strong coating properties and makes the substrate efficiently homogeneous. Available pack size: 10 l

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 15 SUBSTRATE PREPARATION

The substrates to be coated with the paint CERESIT CT 15 should be smooth, even, dry and free from any substances that decrease adhesion: grease, bitumen, dust, etc. Any dirt or weak coats should be removed. The existing adhesive or lime paint coatings should be removed.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 15

The content of the packing should be stirred. Neither rusty containers nor tools should be used. Do not dilute the paint! It is recommended to apply one layer of CERESIT CT 15 evenly using roller or brush. Drying time is approx. 3 hours. Tools and fresh stains should be washed with water. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT 15

The priming paint should be applied in the ambient temperature and that of the substrate from +5 °C to +25 °C and the humidity below 80 %. In case of contact with eyes, they should be rinsed with water and a general practitioner should be consulted. 

Related Articles

Related products

Frequently asked questions