Skip to Content
Recent searches
      ${product.media_gallery.label}

      Wet plasters (finishes)

      CERESIT CT 177
      Decorative Silicone-Acrylic Façade Plaster

      Decorative thin-layer plaster for indoor and outdoor applications. Mosaic plaster, grain size 0-6 mm.
      • High decorative values
      • Resistant to weather conditions and to scrubbing
      • With high-impact strength

      TDS (1)

      SDSS (47)

      Certificate Public (1)

      Find a retailer
      We have you covered
      Find a retailer

      Product Description

      CERESIT® CT 177 is used for making decorative, colourful plaster coatings on traditional plasters, concrete and gypsum substrates, on chipboard, plasterboard. The binder is transparent resins and the fillers are coloured quartz pebbles. After setting, a colourful render is obtained. CT 177 is recommended for use on walls exposed to abrasion and dirt inside buildings. Outside buildings, it is recommended for use on surfaces subject to rapid soiling. Available pack size: 25 kg.
      • High decorative values
      • Resistant to weather conditions and to scrubbing
      • With high-impact strength
      • Bridging minor scratches and cracks
      • Ready-to-use
      • Easy to clean
      ${product.media_gallery.label}
      Ceresit-CT177-25kg-Front-UK-ecommerce_Global_layout.tif

      How to Use
      How to ceresit ETICS CT 77 and CT 177 step 1

      CERESIT CT 177 PLASTER MIXING AND SUBSTRATE PREPARATION

      CERESIT CT 177 can be applied to even, load-bearing, colour-uniform, dry and free from substances that reduce adhesion substrates. The substrate must be sound, dry, clean and free from agents that impair the adhesion of subsequent layers. Old paint coatings of low resistance, wallpaper or any soiling should be removed. CT 177 can be applied after the quartz primer CT 16 has dried completely.
      How to ceresit ETICS CT 77 and CT 177 step 2

      APPLICATION OF CERESIT CT 177

      Immediately before use, stir the contents of the container with a slow-speed drill with a basket mixer until a homogeneous consistency. Apply the plaster mass evenly with a stainless steel trowel in a layer min. 5 times the thickness of the grain. Subsequent layers should be applied wet-on-wet and smoothed. On one surface work without technological break, maintaining uniform consistency of the material.
      How to ceresit ETICS CT 77 and CT 177 step 3

      IMPORTANT TO NOTE WHEN USING CERESIT CT 177

      The works should be carried out in dry conditions, at the temperature of air and substrate from +10°C to +25°C and relative humidity of air below 80%. Freshly after application, plaster CERESIT CT 177 has a milky colour, which disappears as it dries. With prolonged contact with water, it may temporarily return, until the surface dries again. Avoid using CT 177 plaster in areas exposed to prolonged dampness.

      Frequently asked questions

      CERESIT CT 177 is used for making decorative, colourful plaster coatings. CT 177 is recommended for use on walls exposed to abrasion and dirt inside buildings, e.g. at entrances, in corridors and on staircases. Outside buildings, CT 177 is recommended for use on surfaces subject to rapid soiling: plinths, balustrades, on window and door jambs.

      CERESIT CT 177 can be applied on traditional plasters, on concrete substrates, gypsum substrates as well as on chipboard, gypsum plasterboard, etc.

      CERESIT CT 177 is present in CERESIT Ceretherm SOCKEL System
      100% recyclable polypropylene

      Our Eco Buckets are made of polypropylene and can be recycled.
      Up to 62% recycled plastic (PCR)

      We incorporate post-consumer recycled plastic (PCR) into our Eco Buckets, reducing carbon emissions.
      Expanding the Eco Bucket family

      Ceresit's commitment to sustainability extends beyond Tiling products. Now, our Facade Solutions also benefit from Eco Bucket with packaging made from up to 62% recycled plastic.

      Works Well With
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-finishes/primers/product#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
        CERESIT CT 16

        Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-adhesives/adhesive-rendering-mortars/product#/ceresit-thermo-universal/SAP_0201IAC015R0/searchResult.productFields.MainImageAltText}
        CERESIT THERMO UNIVERSAL

        Reinforcing Rendering Mortar - Basic coating XPS, EPS, MW. 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-adhesives/adhesive-rendering-mortars/product#/ceresit-zu/SAP_0201IAC016A1/searchResult.productFields.MainImageAltText}
        CERESIT ZU

        For polystyrene foam and making a reinforced layer; for fixing polystyrene boards and for making a thin layer reinforced with mesh on them when insulating buildings using the light-wet method. 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-adhesives/adhesive-rendering-mortars/product#/ceresit-ct-85/SAP_0201IAC014M9/searchResult.productFields.MainImageAltText}
        CERESIT CT 85

        For fixing Expanded Polystyrene (EPS) boards as well as for applying a thin armoured layer for thermal insulation of buildings by means of light wet method. 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-adhesives/adhesive-rendering-mortars/product#/ceresit-ct-80/SAP_0201IAC014M1/searchResult.productFields.MainImageAltText}
        CERESIT CT 80

        For fixing Expanded Polystyrene boards, XPS and mineral wool boards as well as for applying a thin-reinforced layer for thermal insulation of buildings by means of ETICS. 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-adhesives/adhesive-rendering-mortars/product#/ceresit-ct-190/SAP_0201IAC014F9/searchResult.productFields.MainImageAltText}
        CERESIT CT 190

        For fixing Mineral Wool boards as well as for applying a thin-armoured layer for thermal insulation of buildings in ETICS systems. 

      Looking to Upgrade?
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-finishes/wet-plasters/product#/ceresit-ct-77/SAP_0201IDC014L8/searchResult.productFields.MainImageAltText}
        CERESIT CT 77

        Decorative thin-layer plaster for indoor and outdoor applications. Mosaic plaster grain 1,0-1,6 mm or 1,4-2,0 mm. 
      United Kingdom

      © 2025 Henkel Ltd.