Skip to Content
Recent searches
      ${product.media_gallery.label}

      Wet plasters (finishes)

      CERESIT CT 710 VISAGE
      Bespoke Wet Plaster Finish for Exterior Facades

      With sandstone or granite structure for indoor and outdoor use.
      • With a mix of natural and modified aggregates
      • Resistant to weather conditions and scrubbing
      • Possible application with stencils

      TDS (1)

      SDSS (22)

      Certificate Public (1)

      Find a retailer
      We have you covered
      Find a retailer

      Product Description

      CERESIT® CT 710 plaster is used for execution of decorative plasters on traditional plasters, concrete and gypsum surfaces, chipboards, drywall boards. CT 710 as facade plaster is one of the components within ETICS, CERESIT Ceretherm with application of expanded polystyrene boards and mineral wool. Available pack size: 20 kg.
      • With a mix of natural and modified aggregates
      • Resistant to weather conditions and scrubbing
      • Possible application with stencils
      • Ready-to-use
      • Easy to maintain clean
      • Granite effect in several colours
      ${product.media_gallery.label}
      Ceresit-CT710-Visage-20kg-Front-UK-ecommerce.tif

      How to Use
      How to ceresit ETICS CT 710 step 1

      CERESIT CT 710 DECORATIVE PLASTER MIXING AND SUBSTRATE PREPARATION

      CERESIT CT 710 may be used on smooth, carrying, dry surfaces, free of substances which decrease adhesion. Uneven and damaged surfaces should be first smoothed and repaired. The existing soiling, low-strength layers, paint coats of elastic, lime and adhesive paints, wallpaper and remains of adhesives need to be completely removed. CT 710 may be applied after complete drying of CT 16.
      How to ceresit ETICS CT 710 step 2

      APPLICATION OF CERESIT CT 710 VISAGE

      Mix the contents of the container with a slow-speed driller fitted with a basket stirrer to obtain uniform consistence. CERESIT CT 710 Granite should be applied manually, uniformly on the surface, until thickness is achieved which ensures complete coverage of the surface. Use a plastic float to smooth plaster and getting visible before its surface starts to dry out. The float should not be pressed too strongly to the surface. When set, CT 710 creates non-uniform natural stone structure.
      How to ceresit ETICS CT 710 step 3

      IMPORTANT TO NOTE WHEN USING CERESIT CT 710 VISAGE

      Application should be performed in dry conditions, at air and surface temperature from +10 °C to +25 °C and with relative air humidity below 80 %. Do not apply plaster on highly insolated walls, and protect against too fast drying, against rainfall, direct sunlight and strong wind until it is completely hard. Do not mix the product with other resins, plasters, dyes and binding materials.

      Frequently asked questions

      CERESIT CT 710 VISAGE plaster is used for execution of decorative plasters. As facade plaster, it is one of the components within ETICS, CERESIT Ceretherm with application of expanded polystyrene boards and mineral wool. CT 710 is specifically recommended for places exposed to intense wearing and subject to rapid soiling, e.g. building plinths, entrances to buildings, corridors, staircases.

      CERESIT CT 710 VISAGE is applied on traditional plasters, concrete and gypsum surfaces, chipboards, drywall boards, etc.

      CERESIT CT 710 VISAGE is present in CERESIT Ceretherm VISAGE System

      Works Well With
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-finishes/primers/product#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
        CERESIT CT 16

        Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-adhesives/adhesive-rendering-mortars/product#/ceresit-thermo-universal/SAP_0201IAC015R0/searchResult.productFields.MainImageAltText}
        CERESIT THERMO UNIVERSAL

        Reinforcing Rendering Mortar - Basic coating XPS, EPS, MW. 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-adhesives/adhesive-rendering-mortars/product#/ceresit-zu/SAP_0201IAC016A1/searchResult.productFields.MainImageAltText}
        CERESIT ZU

        For polystyrene foam and making a reinforced layer; for fixing polystyrene boards and for making a thin layer reinforced with mesh on them when insulating buildings using the light-wet method. 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-adhesives/adhesive-rendering-mortars/product#/ceresit-ct-85/SAP_0201IAC014M9/searchResult.productFields.MainImageAltText}
        CERESIT CT 85

        For fixing Expanded Polystyrene (EPS) boards as well as for applying a thin armoured layer for thermal insulation of buildings by means of light wet method. 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-adhesives/adhesive-rendering-mortars/product#/ceresit-ct-80/SAP_0201IAC014M1/searchResult.productFields.MainImageAltText}
        CERESIT CT 80

        For fixing Expanded Polystyrene boards, XPS and mineral wool boards as well as for applying a thin-reinforced layer for thermal insulation of buildings by means of ETICS. 
      • ${/content/heliux/adhesive/ceresit/gb/en/products/facade-solutions/facade-adhesives/adhesive-rendering-mortars/product#/ceresit-ct-190/SAP_0201IAC014F9/searchResult.productFields.MainImageAltText}
        CERESIT CT 190

        For fixing Mineral Wool boards as well as for applying a thin-armoured layer for thermal insulation of buildings in ETICS systems. 

      CERESIT CT 710 VISAGE IS PART OF OUR BIM MODELS

      United Kingdom

      © 2025 Henkel Ltd.